Intelligent lighting control for industry and commerce

Control, measure, and optimize your lighting as needed – with sensors, DALI-2, radio technology, and a cloud dashboard. Reduce your energy consumption by up to 30% in addition to an unregulated LED system.
welight intelligent | Grafik | Aktivitaetskurve

Why intelligent lighting control is essential today

Many companies have already switched to LED – yet the lighting often burns there where it is not needed. This leaves significant savings potential untapped.

Intelligent light control ensures that light automatically responds to actual usage, daylight, and operating hours. This reduces energy costs, improves transparency, and supports modern requirements such as ESG reporting or energy management.

Practical example

Enercon

Wind energy plants and industrial infrastructure
The example of ENERCON clearly demonstrates how intelligent lighting control can be scaled up in industrial environments. The solution combines local control, connected sensors, and automated monitoring to create a system that makes energy consumption, maintenance, and operation more transparent.
  • 3 Ethernet gateways
  • 3 Network Servers
  • 60 integrated sensors
  • Local and cloud-based control
  • Automated emergency light testing
  • Operating costs from €37,503 to €2,170 per year
  • 94% cost reduction
  • Significantly higher transparency and automated monitoring

90%* Save energy costs in industrial lighting.

*
Compared to conventional lighting
Their industrial production is on the path to efficiency.
With welight intelligent, you can future-proof your industrial lighting. Benefit from automatic on/off, dimming, and detailed monitoring – while saving up to 90% in energy costs and increasing your productivity.
%
Inventory
However, this type of light fixture not only consumes a lot of energy; its sale has even been banned since September 2023 with the fluorescent tube ban. Therefore, companies now have to retrofit – and welight intelligent has the appropriate solution.
 %
LED
Without active control of the lights, many potential savings in industrial lighting remain untapped. Simply turning the lights on and off consumes a large amount of resources, since not all work areas need to be continuously and uniformly illuminated.
 %
LED intelligently controlled
Smart LED spotlights only illuminate what is being used – and save up to 90% energy. At the same time, they provide data for optimization and can be flexibly and without programming set up.
 %
Equipment

Everything from a single source.
Manufacturer-neutral and open.

Manufacturer-neutral, flexibly expandable and open to existing building technology, the system enables demand-based lighting, transparent consumption data and efficient control.

Hardware

  • Presence and daylight sensing
  • DALI-compatible luminaires and control devices
  • Gateways & control modules for zones
  • Retrofit components for existing systems

Software

  • Central control of zones, scenes & schedules
  • Monitoring dashboard for consumption & status
  • Analysis as a basis for modernization / EPBD
  • Open interfaces for building management
Wireless system architecture via a secure mesh network - without interference with the company's own network and usually without the need for re-wiring.
Control functions

That must be intelligent lighting control!

Presence, daylight, shift work, scenes, emergency lighting, and monitoring all interact automatically – for efficient control functions, transparent workflows, and lighting that is tailored to the needs of the building.

Presence control

Sensors detect people, vehicles, or forklift movements and only turn on the lights where there is actually activity taking place.
15–30% savings in material costs

Daylight sensorics

The system takes into account existing daylight and automatically dims the artificial light to the required level.
Constant light output

Time programs

Shifts, weekends, holidays, and company holidays are centrally stored. The light follows the operating calendar.
Automated calendar control

Scenes & Dimming

Light scenes for production, cleaning, maintenance or visitor tours can be accessed via an app or a button.
Flexible light profiles

Emergency light testing

Automated testing cycles, compliant protocols, and error messages reduce manual maintenance.
DIN EN 50172

Cloud Dashboard

Energy consumption, CO₂ savings, outages, and monthly reports are visible across all locations.
Monitoring & Reporting

Advantages at a glance

In industrial and commercial buildings, not only the light fixture determines efficiency, but above all the type of control system. Connected systems provide the foundation for operating lighting accurately, in a comprehensible manner, and in a way that can be adapted.

Up to 30% additional energy savings compared to unregulated LED

Automatic presence and daylight control for efficient operation

No unnecessary running times thanks to demand-based lighting

Transparent consumption data for control and optimization

Future-proof open standards for maximum flexibility

Important questions about light control

Open system instead of manufacturer-based restrictions

Will I still be independent in ten years?
Many systems tie companies into a long-term relationship with a manufacturer whose software and components.

welight intelligent, on the other hand, relies on open industry standards and established interfaces—from lighting control to building automation and integration into overarching systems.
DALI
DALI-2
D4i
Zigbee 3.0
Bluetooth Mesh
KNX
BACnet
MQTT
REST
OPC UA
Can I continue to use existing systems?
Yes, existing building technology, sensors, and control systems can be connected or gradually supplemented depending on the existing infrastructure. This reduces investment risks and avoids unnecessary complete replacements.
How complex is the integration into my building or production environment?
Yes. Through established protocols and interfaces, lighting control can be connected to building automation, energy management, production, maintenance, and monitoring.
Competitive comparison

Open lighting control instead of proprietary system

Welight relies on open standards, local scalability, and flexible integration – without permanent manufacturer commitment and with maximum freedom for future expansions and system adjustments.
Control components

Building blocks for intelligent lighting control

From pushbutton modules to gateways to the central network server: WeLight combines robust hardware with an open, scalable system architecture, creating a flexible foundation for modern, connected lighting control.
welight-intelligent | ILS_Sensor_Perspektive – Perspektive weiss matt
ILS 707

Construction light

For wall mounting and the replacement of conventional surface-mounted switches – even in outdoor areas.

2.4 GHz Mesh
Zigbee 3.0
Bluetooth LE
230 V AC
ILS 707

Button interface

For installation in distribution units or installation trays – with connection for up to four buttons.

Up to 4 buttons
110–240 V AC
D4i
Screw terminals
ILS 707

Ethernet gateway

Connects the wireless 2.4 GHz mesh network to the corporate network.

PoE-capable
Real-Time Clock
Light360 App
IP20
ZETAQLAB

Network server

Central unit for DALI-2 and wireless systems with a web server and LTE connection.

2× Ethernet
RS232 / RS485
LTE + SIM
Web server
FAQ — Intelligent light control

We are happy to answer your questions here or in person.

No. Our systems use DALI-over-Mains (control signal via the 230-V line) or radio (Zigbee/BT Mesh). In most cases, no new data line is required. → See also: Lighting without rewiring.

Yes. All WeLight luminaires are DALI-D4i-capable from the very beginning and sensor-ready. The control can be supplemented at any time – without having to replace the light fixtures.

Yes. Data remains in European data centers. Access and data ownership lie with the customer.

All the lights continue to operate autonomously via the local network. The cloud is an added feature for monitoring and remote access – not a requirement for operation.

From individual rooms to entire camp facilities – the system scales. New locations and halls can be integrated into the existing cloud instance. WeLight Special Agreement: Setting up future locations is free for existing customers (savings of €1,820/year in cloud fees).

Of course. Button modules (ILS 707) allow manual input at any time. Automatic and manual control coexist – the user decides which is the priority.
 Intelligent light control

Request free expert advice now!

Industry
Illuminated area
Consent*

    Request an offer

    Would you like to receive a non-binding offer for lighting equipment? 
    With just a few clicks, we can already help you. 
    1
    Light status
    2
    Your data
    3
    Done
    Lights
    Deployment
    Area

      Download brochure

      Are you interested in our brochure?
      We would be happy to accept your request. You will then have access to the PDF download.

      You have received a confirmation email. We will get back to you as soon as possible.

      You have received a confirmation email. We will get back to you as soon as possible.


      We will send you the PDF file as soon as possible via email.
      Privacy Overview

      This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

      Strictly Necessary Cookies

      Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

      Analytics

      This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages.

      Keeping this cookie enabled helps us to improve our website.

      Marketing

      This website uses the following additional cookies:

      (List the cookies that you are using on the website here.)