Many companies want to modernize their lighting, but are reluctant to interfere with the building structure, long downtime, or high installation costs. This is exactly where welight intelligently comes in – with solutions that enable modernization without requiring extensive rewiring.
Smart lighting often fails in existing buildings not due to the technology itself, but rather due to the infrastructure.
Suspended ceilings that are not accessible
Fully-insulated cable ducts
Heritage protection or restrictions on tenancy rights
Excessive costs for electrical installation compared to the investment
Operational restrictions (no downtime possible)
Inventory modernization
Quick conversion in existing buildings – in operation.
Wireless-connected components and sophisticated retrofit concepts make it possible to modernize existing environments more quickly while simultaneously creating the foundation for intelligent functions.
This is particularly relevant for existing buildings, expanded hall structures, and companies that want to renew their lighting during operation. This significantly reduces effort, implementation time, and interventions in the infrastructure.
Technological approaches in detail
DALI-over-Mains (DoM)
Zigbee 3.0 / Bluetooth Mesh (radio)
Powerline Communication (PLC)
Hybrid approaches
Working principle
The DALI control signal is transmitted directly via the existing 230-V line. No separate control line is required.
Control and sensors are completely wireless via a 2.4 GHz mesh network.
Tax and measurement data are transmitted via the existing power grid (iData).
In practice, we combine these technologies depending on the building structure, for example:
Advantages
Full DALI-2 functionality on existing wiring. Plug-inable when replacing lights. Suitable for all hall areas with normal power supply.
No cables, no installation required. The sensor buttons (ILS 707) only require 230 V AC – no data line required. Range thanks to the mesh topology even in large halls or across multiple floors. Parallel operation Zigbee + Bluetooth = redundancy and fail-safe operation.
Suitable for large industrial areas with many separate circuits. No mesh topology required.
DALI over mains in the main halls, radio (Zigbee) for sensor switches in ancillary areas – without a single meter of new data cable.
Restrictions
Check the line lengths and the quality of the network.
Metal housing or highly shielded environments: Pre-testing recommended.
In addition to Zigbee in areas with difficult radio coverage.
Technological solutions from welight intelligent
welight intelligently combines radio-based sensors and button modules, intelligent lighting and control components, as well as central network servers into a total solution tailored to the specific building. Existing 230-V connections and existing lights can be used further – if technically feasible – or supplemented with retrofit components. Communication is conducted wirelessly; an optional LTE connection enables operation even independent of the local corporate network. This allows for modernizing the lighting without new control cables and with minimal interference with the building structure.
Typical use cases
Scenario of the operation:
Storage room with suspended ceiling
welight solution:
Light replacement without opening the ceiling, button modules only with 230-V connection. Complete control via radio in one working day installable.
Scenario of the operation:
Listed historical administrative buildings
welight solution:
No cable routing visible, no interference with the historical building structure. Radio sensors powered by batteries or via existing 230-V sockets.
Scenario of the operation:
Warehouse and logistics in operation
welight solution:
Rollout possible on a case-by-case basis – the hall remains usable during the installation.
Scenario of the operation:
Lease spaces with limited interference
welight solution:
Tenants can retrofit controllable lighting without any structural changes to the property owner’s part.
Scenario of the operation:
Extension buildings or new constructions without LAN infrastructure
welight solution:
Light control via LTE (integrated modem in the network server) – also works without a local corporate network.
No. Our systems use DALI-over-Mains (control signal via the 230-V line) or radio (Zigbee/BT Mesh). In most cases, no new data line is required. → See also: Lighting without rewiring.
Yes. All WeLight luminaires are DALI-D4i-capable from the very
beginning and sensor-ready. The control can be supplemented at any time
– without having to replace the light fixtures.
Yes. Data remains in European data centers.
Access and data ownership lie with the customer.
All the lights continue to operate autonomously via the local network. The cloud is an added feature for monitoring and remote access – not a requirement for operation.
From individual rooms to entire camp facilities – the system scales. New locations and halls can be integrated into the existing cloud instance. WeLight Special Agreement: Setting up future locations is free for existing customers (savings of €1,820/year in cloud fees).
Of course. Button modules (ILS 707) allow manual
input at any time. Automatic and manual control
coexist – the user decides which is the priority.